Hard Drive Tools : HDD Erase

1
3



Support this Channel : paypal.me/tkComputerService

How I setup and use HDD Erase to wipe data from ATA Hard Drives. How to erase Hard Drives with HDD Erase.

*N.B./Disclaimer – This video shows one of possibly many ways, under one computer’s configuration, to implement the desired effect. If you choose to follow this example, you do so AT YOUR OWN RISK.*
___________________________

Download at:
___________________________

Free ISO BurnerRecorder:
or

___________________________

To make a USB Drive Bootable with the HDD Erase Image (hdderase.iso), you may first need to extract the .iso file itself. You can do this with PeaZip:

For burning the HDDErase.iso Image to a USB Drive:
___________________________

To make a bootable Floppy: Make a standard bootable Floppy and put the “hdderase.exe” on it.
___________________________

The program I’m highlighting here is HDD Erase or (a.k.a.) Hard Disk Drive Erase.
It downloads as a compressed .ZIP folder that contains various files, including an .EXE and an .ISO Image.
This Program destroys data, permanently. If you forget to back-up some data,
like maybe your favorites, they are gone. That is extremely important to remember!
HDDErase is an older program, but still gets the job done. If your BIOS does not allow the setting of a secure Hard Drive Password, HDDErase will not run. Unfortunately, most newer BIOSs don’t allow the setting of a HD Password.
To use HDDErase download and extract the contents of HDDErasreWeb.zip.
Then you can burn a CD, make a bootable floppy or a bootable USB Key.
After burning the Disc make sure the Computer is set to boot from the CDDVD Drive.
This can be accomplished through the BIOS or by selecting the “Boot Menu” (F12 for most) at POST and then choosing the Drive where the HDDErase Disc is located.
When HDDErase boots it’ll present the User with a custom Windows 98 Start-up Menu.
The first selection is the most compatible, but you can try the other selections
if it fails to boot. Once HDDErase starts it’ll goto a Command Prompt.
At the Command Prompt – type-in “hdderase” – then “Enter”. The User will
be presented with a couple of Warning Screens. Then you can Select the Hard Drive you wish to erase – at the Options Menu type-in “1” – then “Enter”. HDDErase will now start erasing the selected Drive. Once the Hard Drive has been erased you can re-boot into your Operating System Disc or create and format a new partition.
___________________________

The entire Article can be found here:

Nguồn: https://scoutdawson.com/

Xem thêm bài viết khác: https://scoutdawson.com/tong-hop/

1 COMMENT

LEAVE A REPLY

Please enter your comment!
Please enter your name here